Username: *
Password: *
Forgot Password?   

Home » Forums » Support » LEGO Laser Scan Station

Image Detection Problem

Submitted by Zully04 on Tue, 07/14/2009 - 09:41

I have a problem with the project. I make all the procedure with the glass substrate, but when I run the scan it seems like nothing was detected. The metals that I used are cesium, aluminum, cobalt and iron and the electrolyte solution was KOH. I would like to know if this has happened before and if anyone have some explanation for this.

‹ exciting work at a quicker pace!!! faster scanning times Detected Output ›

auto scale

Submitted by jennyschuttle on Tue, 07/14/2009 - 10:58.

Also, when you are running a scan make sure to right click on the scaling bar on the right side of the scan station program to turn on the auto scale. This can also cause you not to see the image you should.
Thanks,
Jenny

conductive side of the glass

Submitted by jennyschuttle on Tue, 07/14/2009 - 10:55.

Are you sure you are printing on the conductive side of the glass?